Langmuir Systems Plasma Torch Consumables Tools Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice sturdy box to hold Plasma torch consumables. It holds 5 shield caps, 10 electrodes & 10 nozzles
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 173
- Wydruki
- 2
- Wyświetlenia
- 1052
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Yanev's parametric toolbox to store consumables for my crossfire pro plasma cnc. The consumables this is designed to hold are for the Razorweld 45 or Hypertherm Powermax45. Part numbers are listed below
I resized his box to fit my needs here.
Overall dimensions are 188.5mm L x 122.5mm W x 45mm H
This box will hold:
- 5 torch shields (#220673)
- 10 nozzles (#220671)
- 10 electrodes (#220669)
I've designed the box so that the divider section inserts into the original case, that way if changes or modifications to the divider are needed you don't need to re print the entire box. However, this will use up a bit more plastic to begin with.
If you don't plan on making any changes you can save plastic by just printing the Langmuir_Box_Bot_Combined.
Required Hardware:
- 4 M3x25mm Screws for the latch and hinge sections
- 2 M3x30mm Screws for the Hinge Point
Instructions:
- Print Langmuir_Box_Top