1 / 2
Slim 10HP Tracker for Magnetic Frosthaven/Gloomhaven standees - Second Edition — zdjęcie 1
1 / 2

Slim 10HP Tracker for Magnetic Frosthaven/Gloomhaven standees - Second Edition

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thin version of 10HP tracker for Magnetic Frosthaven/Gloomhaven standees - Second Edition

Ocena
0 / 5
Polubienia
0
Pobrania
27
Wydruki
0
Wyświetlenia
211
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

I've been printing and assembling the standee bases from the “Magnetic Frosthaven/Gloomhaven standees - Second Edition” model.  I love the idea, but the additional 10HP magnetic trackers are quite thick and require two magnets.  I figured it might be nice to use a slim version instead.  I designed my own model for these, providing two variants.  One has a simpler, easier-to-read font, and the other has a font that's a little more thematic for fantasy games.  (Photos show comparison to the original 10HP tracker.)

I printed mine in two colors to make the letters pop more.  It also helps when attempting to count multiple stacked trackers beneath a single standee.  I went with red/black.  I'd suggest a brighter color if you put the lighter color on the bottom, as this red is still a bit dark to read.

Models are available in Fusion 360 .f3d and STL formats.  I've also increased the diameter of these trackers to match the 31mm diameter of the standee bases so they don't get hidden beneath the standee

Recommended print settings:

  • 0.3mm nozzle for better details
  • 0.15mm layers (half the nozzle diameter)
  • 20% infill for top layer support
  • Optional:  Try using ironing for an even smoother top layer!

Note:  These require 5mm diameter x 1mm thick magnets!  Pause before top layers to insert magnets, then resume the print.  Make sure the magnet top/bottom matches your standee bases if you want the text up or down!

Tagi