Makers Select / Wanhao i3 Pi Cam Rear Z Axis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Maker Select v2 Z axis motor. camera mount.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Maker Select v2 Z axis motor. camera mount. This mount puts the camera behind the extruder allowing a better view as the cooling fan wont be blocking the nozzle view like other mounts might.
Prototyping [picture] was printed at .24, but I suggest .2 and it will need supports.
You can find the original here https://www.thingiverse.com/thing:2886101, for the proper camera housings to print for whichever camera you are using.
I'll try and upload a version in the future that requires no supports, however it will move the arms up to the top of the mounting block so the angle will be slightly higher.
Pi Cam 1, 2, or 2.1 (Use proper camera housing)
M3 15mm housing mounting bolt