EVA Beacon mount with wire cut out
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EVA Fan duct with mount for Beacon and improved cable routing.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As all EVA Beacon owners know, you will have to solder the cable directly to the Beacon if you are using the default fan duct because of the limited space. I was having alot of issues routing the wires along the fan duct in a safe way so I made some cut outs and a placed some loops for cable ties to secure the cable properly.
It may be preferable to solder the wires to the other (top) side of the PCB in order protect them even more.
(this version is for heat inserts)
==== Update 21.06.2023 ====
V2: I added some more material around the cut outs in order to hold the wires up even better. This version is untested. Feedback would be appreciated.