1 / 5
Ender 3 Circuit Board cover for bottom of display board — zdjęcie 1
1 / 5

Ender 3 Circuit Board cover for bottom of display board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this cover to protect the board and my fingers from touching or shorting out the board.

Ocena
0 / 5
Polubienia
5
Pobrania
42
Wydruki
0
Wyświetlenia
292
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This bolts on to the bottom of the display board using the existing screws.  In the photos you will see the board that I have and the suggested print orientation.

I think on a few occasions I accidentally shorted out the board with my fingers causing the printer to reboot.   The purpose of this is to create a protective “cage” around the circuit board so that I don't have to worry about accidentally touching the circuit board.

Here are the slicer settings and suggestions for printing:

  • 0.2 Layer Height (Normal).
  • Horizontal shells set to 0 for top and bottom.
  • 15% Infill using honeycomb pattern.
  • Organic (or tree) supports.
  • Since I was using blue tape on my bed, I set the bed temperature to 0.
  • Nozzle temp set to 205 for first layer and 200 for remaining layers.

Please post comments if you find this useful or have ideas on how to improve.

Tagi