Ender 3 Circuit Board cover for bottom of display board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this cover to protect the board and my fingers from touching or shorting out the board.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 42
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
This bolts on to the bottom of the display board using the existing screws. In the photos you will see the board that I have and the suggested print orientation.
I think on a few occasions I accidentally shorted out the board with my fingers causing the printer to reboot. The purpose of this is to create a protective “cage” around the circuit board so that I don't have to worry about accidentally touching the circuit board.
Here are the slicer settings and suggestions for printing:
- 0.2 Layer Height (Normal).
- Horizontal shells set to 0 for top and bottom.
- 15% Infill using honeycomb pattern.
- Organic (or tree) supports.
- Since I was using blue tape on my bed, I set the bed temperature to 0.
- Nozzle temp set to 205 for first layer and 200 for remaining layers.
Please post comments if you find this useful or have ideas on how to improve.