Prusa Mini+ heatbed connector cover - 48deg longer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to…
- Ocena
- 4,865 / 5
- Polubienia
- 229
- Pobrania
- 923
- Wydruki
- 36
- Wyświetlenia
- 4021
- Oceny
- 37
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being constricted.
Print instructions
To match the original Prusa Mini+ parts the recommended print settings are 0.2mm layer height, with infill set to 20% GRID, and using black PETG material.
Both files print okay without supports, with the inside facing up, although the bolt holes will need a little bit of clearing out.
Fixings used are two M3 x 15mm socket head bolts, with matching locknuts.