Prusa Mini+ heatbed connector cover - 48deg longer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to…
- Rating
- 4.865 / 5
- Likes
- 229
- Downloads
- 923
- Makes
- 36
- Views
- 4,021
- Reviews
- 37
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being constricted.
Print instructions
To match the original Prusa Mini+ parts the recommended print settings are 0.2mm layer height, with infill set to 20% GRID, and using black PETG material.
Both files print okay without supports, with the inside facing up, although the bolt holes will need a little bit of clearing out.
Fixings used are two M3 x 15mm socket head bolts, with matching locknuts.