Aquarium/Paludarium Water Heater Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for ZooMed aquarium/paludarium heater.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought the ZooMed paludarium water heater for my turtle tank and was worried my baby turtle would stick his head in between the fins where the heating element is.
Made this mainly for the water heater to be mounted on the bottom of the tank. This fit the 25w one with plenty of extra space. The 100w one is the same size so this should work the same. The holes are mostly 5mm in diameter, but there are a few that vary.
I'm not sure if all of the heaters like this are the same size or not, but the model should be easily adjustable to fit them if they are different in sizes.
Printed in Prusament PETG for pet safety.
.3 layer height without supports