1 / 4
Fastener for the 4028 fan inlet (short version) — zdjęcie 1
1 / 4

Fastener for the 4028 fan inlet (short version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fastener for the 4028 fan inlet

Ocena
0 / 5
Polubienia
20
Pobrania
92
Wydruki
0
Wyświetlenia
516
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a remixed variant of the fastener presented by RPK3D (https://www.printables.com/model/420447-eva3-4028-fan-inlet-shorter-version), but is located underneath the 4028 fan. I had to do so because I need more clearance for the cables that come into my EBB36 toolboard.

The model uses two M3 brass heat inserts.

I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.

Tagi