1 / 1
Bigger Prusa Mini Extruder Rotation Vizualizer (Stock&Bondtech)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created this remix for my Prusa Mini. I really love the design, but Stock you can't see any movement.
- Ocena
- 4,8 / 5
- Polubienia
- 16
- Pobrania
- 111
- Wydruki
- 6
- Wyświetlenia
- 919
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (0)Kolekcje (34)Powiązane
Created this remix for my Prusa Mini. I really love the design, but Stock you can't see any movement. So I created 2 Bigger versions with a little offset (so it will also fit replacement steppers). Glued to standard 8x3mm magnets.
There are 4 versions:
- a smaller one as shown in the picture (you'll see the triangles if you have a look from a bit above)
- the smaller one in mirrored
- a bit bigger one normal (you should see the triangles from frontview)
- a bit bigger one mirrored
Use the normal version for the Stock rotating direction and the mirrored one if you have the Bondtech Upgrade.