Deflecting PC Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud for 40mm - 220mm pc fans, which directs airflow at an agle.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 753
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Deflecting PC Fan Shroud
Motivation
I was using the original model, until i tried to mount two of these shrouds side by side and realized, that this is not possible. While remixing it, i thought, i could make it even more customizable. So here it is, have fun with it :)
Details
Fan shroud which directs the airflow in a 30°.
Available as 3mf in the sizes 40mm, 50mm, 60mm, 70mm, 80mm, 92mm, 120mm, 140mm, 200mm, 220mm.
Additionally, i will provide the fusion file, where you can customize:
- defleciton angle
- mounting hole diameter
- number of grill ribs
- fan size
- position of the mounting holes
Hope this helps you and have fun with it :)
Print settings
Nozzle: 0.4 or 0.6 would be best, as the grill ribs are 1.2mm wide
Layer height: 0.2mm as everything is a multiple of 1mm