1 / 4
5 Gallon Bucket Lid in  Parts — zdjęcie 1
1 / 4

5 Gallon Bucket Lid in Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

5 gallon bucket. Lid 6 parts. Openings with standard closure.

Ocena
0 / 5
Polubienia
40
Pobrania
199
Wydruki
0
Wyświetlenia
1489
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

5 gallon bucket. Lid 6 parts. Openings with standard closure. For cables (Blank Cab Cable) and for extensions such as heating; level. 
The model is very stable. I set the connection in the lid a little lower to achieve more stability.

Requires a spacer module as the first part.

I installed the 80mm spacer as a filter element

 The passages are with the standard closure so that the net pots could be used there. A level indicator is also planned. At the moment I use a net pot in the lid to measure the EC and PH

On the outside of the lid there is a thread for each part in order to secure the lid against lifting with screws. M5 x 20 fit me   At least 3 recommended.   Every second.

 

Inside, the 6 parts are screwed together with 3 M5x20 plus washers and nuts.

You need 3 parts each with a retaining lug and 3 without, whether with or without a leadthrough.

2 parts can be printed together on an MK3

 

Please divide the object in the slicer and then print the parts you want.

 

There is a draft on Thingi https://www.thingiverse.com/thing:4580194   from daemonfox  but this model I completely redesigned in Fusion 
 

Tagi