5 Gallon Bucket Lid in Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5 gallon bucket. Lid 6 parts. Openings with standard closure.
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 199
- Makes
- 0
- Views
- 1,489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
5 gallon bucket. Lid 6 parts. Openings with standard closure. For cables (Blank Cab Cable) and for extensions such as heating; level.
The model is very stable. I set the connection in the lid a little lower to achieve more stability.
Requires a spacer module as the first part.
I installed the 80mm spacer as a filter element
The passages are with the standard closure so that the net pots could be used there. A level indicator is also planned. At the moment I use a net pot in the lid to measure the EC and PH
On the outside of the lid there is a thread for each part in order to secure the lid against lifting with screws. M5 x 20 fit me At least 3 recommended. Every second.
Inside, the 6 parts are screwed together with 3 M5x20 plus washers and nuts.
You need 3 parts each with a retaining lug and 3 without, whether with or without a leadthrough.
2 parts can be printed together on an MK3
Please divide the object in the slicer and then print the parts you want.
There is a draft on Thingi https://www.thingiverse.com/thing:4580194 from daemonfox but this model I completely redesigned in Fusion