Engineer PA-06 Wire Stripper Skadis holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis holder for Engineer PA-06 Wire Stripper. Remixed from @Rene's holder for PA-09 Crimpers
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I imported Rene's Skadis mount for the Engineer PA-09 crimpers into Onshape and made a copy to hold the Engineer PA-06 wire strippers. I have included two versions. One plain and one with embossed text (on the opposite side of the PA-09 crimper mount so you can place them next to each other and read the text on either side).
I have had good success printing the models as orientated using PrusaSlicer's organic supports on the buildplate only. The support within the slot pulls out super easily with tweezers or a skinny pair of needle nose pliers.
Note: Due to the shape of the jaws on the wire strippers they sit at a slight angle in the holder. If I made the slot wider they would sit straight, but be too loose to hold the strippers in place properly.