Engineer PA-06 Wire Stripper Skadis holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skadis holder for Engineer PA-06 Wire Stripper. Remixed from @Rene's holder for PA-09 Crimpers
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 87
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I imported Rene's Skadis mount for the Engineer PA-09 crimpers into Onshape and made a copy to hold the Engineer PA-06 wire strippers. I have included two versions. One plain and one with embossed text (on the opposite side of the PA-09 crimper mount so you can place them next to each other and read the text on either side).
I have had good success printing the models as orientated using PrusaSlicer's organic supports on the buildplate only. The support within the slot pulls out super easily with tweezers or a skinny pair of needle nose pliers.
Note: Due to the shape of the jaws on the wire strippers they sit at a slight angle in the holder. If I made the slot wider they would sit straight, but be too loose to hold the strippers in place properly.