Grooved three phone charge stand/dock for Anker PowerPort Atom III
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylish charge base/dock for up to three phones, designed to hold an Anker PowerPort Atom III in its base.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Being fed up with the mess of chargers and cables lying around in my living room, I created this charging stand/dock/base (whatever you want to call it) to hold up to three smartphones. Its base is designed to hold an Anker PowerPort Atom III Slim (or Anker 543 Charger, which seems to be the same thing in the US), which provides up to 65 W – enough to quick charge three phones at once, or perhaps even a USB-C laptop placed by the side.
To keep things flexible and universal, the charging connectors are not integrated directly into the stand; rather, the idea is to have a short length of cable protrude from the stand (see photos).
The charger is affixed inside the base with double sided adhesive mounting tape. Cables can be routed through the holes with their connectors on, or alternatively, the version with a small AC cable hole can be used if you are going to detach/reattach the AC plug anyway. I used an angled C7 connector to have more space inside the stand; this would require a big hole to pass it through, so I cut off the AC plug and attached a new one after installation.
The base plate is attached with four self tapping 2.5x12 mm flat head screws.
Printer: Bambu Lab X1-Carbon
Filament: Bambu PLA Matte Ivory White
Printing details: 0.20mm Standard setting. Stand printed upside down with automatic supports (interface material: Bambu PLA Support) for the three big grooves and the cable holes. Sides sanded to remove layer structure.