MK3s extruder cooler - 40x40mm fan version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Especially suitable when the printer is troubled by "Heat Creep".
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 2
- Wyświetlenia
- 452
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For a long time I used the first version on a 30x30 fan, but recently the fan started to whistle. So I made this version on a 40x40mm fan I had at home.
Improved version with fan.
The fan used is "40x40x10 5V".
The RPI-port on the einsy board is used as power supply. If you are using RPI on your printer, you can use the free GPIO pins directly on the RPI.
It mainly helps when the printer is inside an enclosure.
Suitable for example "PLA Prusa Galaxy Black" or "PLA Sunlu WOOD - LowTemp". In general, it is suitable for all filaments that do not benefit from higher temperatures inside the enclosure.
Don't forget to use thermal paste between the stepper motor and the heatsink. I recommend "arctic mx-4" paste
Used cooler - "nema17 cooler - 40x40x11mm"
Used fan - "5V Axial fan 4010"