1 / 2
MK3s extruder cooler - 40x40mm fan version — image 1
1 / 2

MK3s extruder cooler - 40x40mm fan version

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Especially suitable when the printer is troubled by "Heat Creep".

Rating
5 / 5
Likes
10
Downloads
46
Makes
2
Views
452
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

For a long time I used the first version on a 30x30 fan, but recently the fan started to whistle. So I made this version on a 40x40mm fan I had at home.

Improved version with fan.
The fan used is "40x40x10 5V".
The RPI-port on the einsy board is used as power supply. If you are using RPI on your printer, you can use the free GPIO pins directly on the RPI.

 

It mainly helps when the printer is inside an enclosure.

Suitable for example "PLA Prusa Galaxy Black" or "PLA Sunlu WOOD - LowTemp". In general, it is suitable for all filaments that do not benefit from higher temperatures inside the enclosure.

Don't forget to use thermal paste between the stepper motor and the heatsink. I recommend "arctic mx-4" paste

Used cooler - "nema17 cooler - 40x40x11mm"

Used fan - "5V Axial fan 4010"

Tags