1 / 1
5015 Blower Fan Shroud for DyzeExtruder Pro/GT + DyzeEnd Pro/GT — zdjęcie 1

5015 Blower Fan Shroud for DyzeExtruder Pro/GT + DyzeEnd Pro/GT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A slightly altered version of an pre-existing fanshroud model from DyzeDesign.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
136
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is an modified version of the "LEFT_DyzeEnd GT fan shroud". I'm currently using this on my Ender 3 setup with their bracket plate: https://www.thingiverse.com/thing:5241344 

This honestly works fairly well and I'm sure this fan shroud can be used with any printer configurations that uses the DyzeExtruder Pro/GT + DyzeEnd Pro/GT assembly.

All I have done is:

  1. Extended the mounting positions to be longer for more height adjustment to the nozzle
  2. Slightly better printing in regards to the bridging components
  3. Added an small notch for the 5015 blower fan(for the fans with an retention clip on the end of the blower mouth like mine was) 

Print Settings:

Material: PETG

Resolution: 0.16mm(or variable)

Walls: 3

Top/Bottom Layers: 3

Tagi