Spiral LED Lamps | WLED Sound Reactive Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cool lighted decoration, easy to build and controllable with your phone!
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 955
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Assembly instructions for the spiral lamps
To build these lamps, the following parts are required
| Part | Link |
|---|---|
| 5V 8A power supply | https://www.amazon.de/dp/B00MWQF08C |
| GX12 Connector (4 Pin)* | https://www.amazon.de/dp/B07JPXV3BT |
| WS2812** | https://www.amazon.de/dp/B01CDTED80 |
| ESP32 | https://www.amazon.de/dp/B08BTS62L7 |
| INMP441 Microphone | https://www.amazon.de/dp/B081JN1CW5 |
| Switch | https://www.amazon.de/dp/B07QL5B3T5 |
*3 Pin connectors are also working
**1m is enough for 5 lamps (you need a total of 19 [6 + 6 + 7] LEDs per lamp)
Also required:
- soldering iron and solder
- shrink tubing
- at least a 3-wire cable (I cut up old USB cables)
- more cables/wires to connect the microphone and GX12 connectors to the ESP32 and power
- cold appliance plug with cable
- 6x M3*12mm screw, 2x M3 washers and nuts (https://www.amazon.de/dp/B0932TNQ5H)
- 4x M3*5*5 nut heat insert (https://www.amazon.de/dp/B09B7F2XM3)
(The links are for the German amazon shop)
Wiring
Lamps
Make sure that you solder the same cables (GND, VCC and Data) to the same connections for all plugs, so that you can plug all lamps into all plugs.
In the WLED configuration, the following outputs are used for the data lines of the lamps:
25, 26, 27, 33, 12, 13, 16, 17
Microphone
| Microphone (INMP441) | ESP32 |
|---|---|
| GND | GND |
| VDD | 3V3 |
| SD | 32 |
| SCK | 14 |
| WS | 15 |
| L/R | - |
Useful Links
Install WLED: https://install.wled.me (Version 0.13.3 Sound Reactive)
My WLED presets: https://howtohomemade.de/downloads/HTH_Spiral_Lamp_Presets.zip
My WLED configuration (use at own risks, uses 8A of current): https://howtohomemade.de/downloads/HTH_Spiral_Lamp_Configuration.zip
If the links don't work for you, copy the link into the address bar of your browser.
Demo Videos
Video of 4 spiral lamps with WLED presets changing every 30 seconds:
Video of 4 spiral lamps, with the sound reactive WLED presets: