1 / 1
PS3 Slim(2xxx/25xx) Fan shroud top surface
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not fit on any 3xxx models. This is mean to be used together with a 3D pen to make repair on cracked fan shroud.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- glue brittle pieces back together using 3d pen with ABS material.
- overfilled in any cracks and open wounds.
- make sure the inside there is minimal airgap, trying to make it as solid as possible.
- sand down as much protusions as possible
- if you fan shroud's top surface is uneven and ugly, then print this model in ABS and glued it on with acetone or 3d pen.
- again, make sure there's minimal airgaps.
- drill fans screw holes, that was filled, back open.
- I recommended you also filled all other screw holes solid and drilled them back open too. The plastic on those places are thin and stressed.