1 / 1
PS3 Slim(2xxx/25xx) Fan shroud top surface
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Not fit on any 3xxx models. This is mean to be used together with a 3D pen to make repair on cracked fan shroud.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 509
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- glue brittle pieces back together using 3d pen with ABS material.
- overfilled in any cracks and open wounds.
- make sure the inside there is minimal airgap, trying to make it as solid as possible.
- sand down as much protusions as possible
- if you fan shroud's top surface is uneven and ugly, then print this model in ABS and glued it on with acetone or 3d pen.
- again, make sure there's minimal airgaps.
- drill fans screw holes, that was filled, back open.
- I recommended you also filled all other screw holes solid and drilled them back open too. The plastic on those places are thin and stressed.