Desiccant core for Sunlu spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improve humidity control in Bambu Lab AMS
- Ocena
- 4,75 / 5
- Polubienia
- 24
- Pobrania
- 156
- Wydruki
- 4
- Wyświetlenia
- 1459
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Desiccant core for plastic 1kg Sunlu filament rolls intended for use with Bambu Lab AMS. I designed this for the largest surface exposure to the air for best effect. Uses about 27g of PLA, contains about 75g of colour change silica gel. Fill each compartment about ⅔ full. Use a 4G x 9mm self tapper to close off.
Note: I strongly advise sifting your desiccant to get rid of undersized particles - not a good idea to get them in the AMS mechanism! I happen to have a suitable colander in the kitchen, otherwise I would have designed something to do the job.
Edit: @Pitax_1229381 has made an end cap for this that is somewhat more tolerant of printer accuracy. https://www.printables.com/model/618670-cap-for-desiccant-core-for-sunlu-spools