CPAP Air Hose Adapter Casing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The design is based on the Transcend II air hose adapter casing
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
This model is the casing that the soft insert goes into and only includes the section that connects to the CPAP. There's an insert that snaps into the casing, that connects the hose to the casing, that is not included. I will likely model this later (I'll provide the link here when it's done).
I've had this CPAP for about 5 years or so and it's seen a lot of use. The casing started to split last year and I put some gorilla tape on it as a temporary fix until I got around to designing a 3d printable version of the casing. I used it last night and was a perfect fit. I added some ribs on the inside for a better grip on the insert this morning and this is the version you'll download.
I've provided the STL, pictures of the CPAP for recognition, and 2 gcode files (1 for a 0.6mm nozzle and 1 for a 0.4mm nozzle).
I hope you find it useful.