1 / 1
QIDI X-Plus 3 Parts Cooling Fan Duct — zdjęcie 1

QIDI X-Plus 3 Parts Cooling Fan Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Alternative parts cooling fan duct for X-Plus 3 to use standard 5015 blowers.

Ocena
0 / 5
Polubienia
57
Pobrania
278
Wydruki
0
Wyświetlenia
2815
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Wires broke on my QIDI X-Plus 3's parts blower, which is a non-standard 5015 blower that's hard (or impossible to find).  The original duct requires cutting to fit a Winsinn 5015 blower but the giant hole causes pressure loss.

Print in PETG for heat resistance since this sits near the nozzle.  Prints without supports if the intake is oriented upwards.

Tagi