1 / 5
Hex Shelves - Sturdier — zdjęcie 1
1 / 5

Hex Shelves - Sturdier

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This original creation, using Fusion360, was inspired by the Hex Shelves from @Prefectionist. Similar but sturdier.

Ocena
0 / 5
Polubienia
29
Pobrania
46
Wydruki
0
Wyświetlenia
494
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I spent a lot of time trying to decide what shelves to put on my wall to show off my 3D builds. Nothing appealed to me until I came across @Prefectionist's hex shelves. I liked the idea but needed something sturdier. That took me to Fusion360 where I created a system that would be easier to print and sturdier to use.

To make it sturdy it uses M3 x 12mm flat head screws to secure the frame to the 100mm rails that are printed with threaded holes. 12 per Hex Shelf (6 in front, 6 in back). I got a bag of 100 from MonsterBolts on Amazon for about $13.

I found that the rails are best printed standing upright, 6 at a time, with a brim. Of course you can adjust the length of the rails to whatever lenght you want using Tinkercad. Just don't do it in the slicer since that will skew the screw threads as well as the overall length.

Tagi