Hex Shelves - Sturdier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This original creation, using Fusion360, was inspired by the Hex Shelves from @Prefectionist. Similar but sturdier.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 46
- Makes
- 0
- Views
- 494
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I spent a lot of time trying to decide what shelves to put on my wall to show off my 3D builds. Nothing appealed to me until I came across @Prefectionist's hex shelves. I liked the idea but needed something sturdier. That took me to Fusion360 where I created a system that would be easier to print and sturdier to use.
To make it sturdy it uses M3 x 12mm flat head screws to secure the frame to the 100mm rails that are printed with threaded holes. 12 per Hex Shelf (6 in front, 6 in back). I got a bag of 100 from MonsterBolts on Amazon for about $13.
I found that the rails are best printed standing upright, 6 at a time, with a brim. Of course you can adjust the length of the rails to whatever lenght you want using Tinkercad. Just don't do it in the slicer since that will skew the screw threads as well as the overall length.