pico neo 3 link lens adapters to retain oculus go faceplate.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
retainers for oculus go faceplate when used on pico neo 3 link
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Share Alike
lens retainers for holding down an oculus go faceplate (amvr with the detachable padding) or standard or fitted facial interface for oculus go, when used on a pico neo 3 link at its middle IPD setting.
the oculus go faceplate is full cloth and will need slight trim to the eye holes so they do not pull the lenses away from central ipd.
to secure and keep in place, push on the 3d printed retainers over the lenses to hold back the faceplate, doubling as lens protectors.
printed for fitment in pla, but TPU would be best.
print as per picture, mirror in slicer.
these are old files, may be of use to someone, I would now recommend cutting a pico 4 amvr faceplate as these are easily sourced on aliexpress.