P
PrintablesAxetom
RC Car Body Clip Retainers
Flex 100% infill 0,2 layer
- Pobrania
- 479
- Polubienia
- 71
- Ocena
- 5
Wyniki wyszukiwania: retainers
Liczymy pasujące modele…
P
PrintablesCoinCorrector
Clear retainer/two retainers case, print-in-place
Made based on the measurements of my and my friend's clear retainers. I hope they are universal enough. Due to a request I made a version for two retainers.
- Pobrania
- 404
- Polubienia
- 28
- Ocena
- 5
P
Printablesvlaine
Pro-Form Dental Vacuum Forming Box - Night retainers
This is my new improved version of a a Pro-Form vacuum forming machine. The previous model is still available, but it will not receive any update. You can print the frame stencil, but do not put in in the oven. The real frame must be made…
- Pobrania
- 255
- Polubienia
- 46
- Ocena
- 5
P
PrintablesDavid Frey
Model Rocket 18mm Motor Mount Tubes with Retainers
These are Motor Mount Tube (MMT) assemblies for 18mm model rocket motors that will fit BT-50, BT-55, or BT-60 body tubes. I wanted to update my 18mm Motor Mount for BT-50 Model Rocket and decided to add the BT-55 and BT-60 as well. I…
- Pobrania
- 210
- Polubienia
- 19
- Ocena
- 0
P
PrintablesArogen67
Motor Retainers BT-20 and BT-50 Estes compatible
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. These motor retainers are designed to be interchangeable…
- Pobrania
- 199
- Polubienia
- 20
- Ocena
- 0
P
Printablesisyork
Hood Insulation Retainers Clips
had to replace the windshield spay nozzles on my 2014 Ram 1500. After removing the Hood Insulation Retainers Clips that are not reusable I found the Automotive clip for a Volvo and reworked it for my Ram. I used the overall dimensions…
- Pobrania
- 160
- Polubienia
- 17
- Ocena
- 0
P
Printablesvlaine
(obsolete - old model) Pro-Form Dental Vacuum Forming Box - Night retainers
*** Please, check the new improved version. This model is considered obsolete and will not receive any update. *** This is a remix of BallardBandit vacuum forming, shaped to fit pro-form dental material. The vacuum attachment are not…
- Pobrania
- 146
- Polubienia
- 58
- Ocena
- 5
P
PrintablesEttienne M
Guitar neck rest with string retainers
remixed from diyinstrument's great neck rest. I added hooks to hold the strings away fretboard for cleaning and oiling.
- Pobrania
- 110
- Polubienia
- 10
- Ocena
- 0
P
PrintablesG4sP4ss3r
Funwheel X7 front and rear cable retainers
Cable retaining clips for fungineers funwheel X7 rails
- Pobrania
- 71
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAlex
DJI (or any) Cable Retainers/Holders
Simple little cable holders I made for storing my DJI charging cables I printed these in clear PETG, and each take about 6 mins to print Enjoy, Alex
- Pobrania
- 63
- Polubienia
- 7
- Ocena
- 5
P
PrintablesRama Shunn
*UPDATED CLAMP* 2020 aluminum extrusion panel retainers for 6mm panels
/------------------------------------------------------------------------------------------------------\ UPDATE NOTE : I ran into some issues with the clamp and adjusted it. The V2 version works much better if your panel sizes aren't…
- Pobrania
- 58
- Polubienia
- 17
- Ocena
- 0
P
Printableskarl helmstetter
Magnet Retainers for Front Door seal
The magnetic clasp in the center is fine, but I was experiencing gaps along the corners, and seeing humidity drop a lot when I kept those corners fully closed. So, to add a tighter seal without major changes, I created this little add-on.…
- Pobrania
- 49
- Polubienia
- 12
- Ocena
- 5
P
Printableskatthulu
Prusa i3 MK2/2.5/2.5S bearing/bushing retainers
The stock u-bolts hold IGUS bearings too tightly, causing excessive friction. These retain the fully plastic bearings in place without clamping them to the rod. Print two of these for the rod that holds two bearings and use the mk3…
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFargo1
1985-90 Firebird Formula and Trans Am Aero Spoiler Wing Retainers
Retainer clips for 85-90 Firebird Formula and Trans Am equipped with the Aero Spoiler. Print with ABS or something stronger. 6 pieces required.
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
Printablescssplayer
LED tape strip light retainers
Works with LED strips that come on the small black spools. Mine measured 9.3 mm across and about 2.5mm thick. Purchased from walmart for ~$6. Printed in PETG so they'll have some heat resistance and flex. Be careful when driving screws,…
- Pobrania
- 34
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPolymerToad
Panduit Wireway Retainers
These are retainers for holding wire into type G and H Panduit wireways. If you have ever worked with these wireways before, you know how annoying it is when wires won't stay put. These aren't as fancy as the ones made by Panduit, but…
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
PrintableslunarLarceny
Halo Nerf Needler Display Stand Corner Retainers
I wanted to wall mount my Needler, but I have cats and I didn't want them to knock the stand off and destroy my Needler when they aren't supervised, so I designed these corner retainers to sit the display base on. Now my Needler sits on…
- Pobrania
- 30
- Polubienia
- 28
- Ocena
- 0
P
PrintablesDavid
CW1 protective FEP retainers
Re-use the old SL1 tank FEP foil by attaching it onto the CW1 platform with these little retainers. Cured prints are easier to remove. pick one of the versions and print 2X. Your CurWa will be easier to clean and won't become all glued up…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJaredIsCoding
Onewheel XR Harness Rail Retainers
Break your harness retainers? Print some more! Printing Instructions Print in a solid material and install!
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMatixBuilt
MB rails harness retainers
These are the harness retainers for MB rails both extended and standard for Xr and standard for GT, should you need to replace them. the extended Xr version aids in the use of the maxxis 12x8 or for just better harness protection should…
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRagingRoosevelt
Replacement Feet & Bungee Retainers for GCI PackSeat (Tripod Chair)
Print Settings If you'd like to remix this, the CAD is available on OnShape . Bungee Retainer PETG, ABS, or ASA are probably ideal. You might be able to get away with PLA but I haven't tested it I printed this with 7 walls which makes it…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 5
P
PrintablesJ Estrada
Voron Legacy Z Bearing Retainers for 209mm Square Hole Hotbed
Many older MK1, MK2, MK3, and some MK4/5 heatbeds were specified with 209x209 hole spacing. These bearing retainers have been redesigned to fit those heatbeds. Since most folks will be tearing down their older i3/bed slingers to have fun…
- Pobrania
- 20
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSpencer
Elephant Tape Dispenser REMIX with modified cutter and retainers for tape roll
I loved the Elephant Tape Dispenser pattern from SnapCount @SnapCount_1393724 but saw there were some changes needed. There was a recommended revision by Petros @Mach0gr to stretch the blade 120% and flip it around which worked well. The…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHelioplast LTD
Ford fender retainers / clips
Fender retainers for various types of Ford vehicles - f-150, explorer, mustang etc. I made them as close to the original as possible. The printed ones on the photos are made using a 0.6mm nozzle and petghf. Feel free to change the print…
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPrusaPilot
Rans S-21 Outbound Brake Bushing Retainers
These hold the factory bushings with additional hardware to keep them aligned, reducing friction and providing a more secure pedal feel.
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTechMagic3D
Pin Retainers for 17mm Hex Extenders
When I installed 6.5mm hex extenders on my Typhon, the screw pins wouldn't fit the driveshaft so I had to use the standard pins. Since I was worried about the pins falling out, I made this sleeve that slides over the hex behind the tire…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJ Estrada
Voron Legacy Z Bearing Retainers for 170mm Square Hole Hotbed (Ender 3)
Many Ender 3 heatbeds were specified with 170x170mm hole spacing. These bearing retainers have been redesigned to fit those heatbeds. Since most folks will be tearing down their older i3/bed slingers to have fun and build the legacy,…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
Printablesgyoung23
Motor adapter for Aeropack and similar retainers
Adapter and spacer to use 38mm motor in 54mm retainer and 29mm motor in 38mm retainer. I recommend printing with a higher temp filament, e.g. PETG, ABS, PCTG, etc.
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 5
P
PrintablesGoal60
Spring retainers TRAXXAS
Damaged. Repair kit not available for purchase at the moment. Can also be used for other Traxxas RC cars. You have to drive and race... 3D printing settings Material: ABS, ASA Layer height: 0,2 mm Infil: 100% Wall thickness: 1,2 mm
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDeathSinger
Python AMS Enclosure Magnet Retainers
These parts are intended to allow you to glue the magnets that are usually press fit into the Python AMS Enclosure Lid. I recommend using at least ABS to print these. While they are an external component of the enclosure they can still be…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBlueShell3D
Screw Boss retainers for PC Engine Duo / Turbo Duo
Save cracked screw bosses on the PC Engine Duo and Turbo Duo with these retainers (and a little glue or epoxy)
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesWillDeed
Pegboard retainers for flat things
There are 4 different files, the first three (small/medium/large) are different sizes depending on how thick the flat thing is that you're trying to retain. Small is basically paper thin and large will fit around something that is about…
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDrawingup
Extended Axle Front Retainers
Remixed Ex-Pigeons's front retainer with extended axle covering lugs
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
Printablestonyno
Magnifier-Lamp Lens Retainers
Conversion parts to hold the standard, 5" lens (5 diopter) on a Lumapro magnifier light (6MNU series) for quick lens swaps. Print upside down from preview. Update: Added a version for an 8 diopter lens. Also added numbers to the side for…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesYasir Bilgiç
Gridfinity Retainers
Organizing your desk, kitchen, or drawers with the Gridfinity Refined ecosystem is a fantastic experience. But when it comes to securing these specific baseplates, we face a major dilemma: If you stick the baseplate directly to the table…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBen Lye
Battle Axe Visor Retainers for Obo Carbon Helmet
I bought a Battle Axe visor for my Obo Carbon helmet but I wasn't super happy with the fitment using the supplied clips so I designed and printed these. They use the spring force of the visor to keep them in place against the grill, and…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesskribidool
Prusa Magnetic Panel Retainers
There are a few iterations of this but they many of them use weaker magnets and just rest on top of the corner screw heads. This allows the top panel to vibrate and creates a poor seal if you're trying to keep it heated. This design uses…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablescmdada
Siglent sds1204x-e foot retainers
https://cad.onshape.com/documents/f1d84935c189b4e6ca6b77e4/w/97386357dcd7eadf47824a91/e/eadc890d8ac4e32ea81bc50b Retaining feet that can be mounted to a surface to stop the oscilloscope from sliding or moving
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesgiddybots
Wire Retainers for Repeat Robotics Drive Pro
These are a simple, lightweight part that slips onto the M2 screws that hold the gearbox of the repeat robotics drive pro. They prevent the wires from bending into the the motor bell. I prefer these over any structure on the chassis, as…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
Printablesbroadseam
Harken C car top and bottom retainers
Pieces to fix a damaged Harken C car Printed in PETG 2mm layer height
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablestdotfish
Xiegu G90 Side Retainers
I took the front loops off of my Xiegu G90 to make it fit better in my backpack. But then I found that those loops helped keep the radio from sliding off the Clip-on Stand that I like to use. Without them the radio could too easily slide…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLincavich
Blurolls (Un)original Prusa Drybox filament spool assembly retainers
I use a hinged lid on my MK4S, which has the BluRolls (Un)original Prusa Drybox mounted to it. I found when opening the lid, the filament spool assembly would tip backwards. These retainers pick up the screwholes of the Drybox frame and…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printables
Funwheel X7 front and rear cable retainers
Cable retaining clips for fungineers funwheel X7 rails
P
Printables
Elephant Tape Dispenser REMIX with modified cutter and retainers for tape roll
I loved the Elephant Tape Dispenser pattern from SnapCount @SnapCount_1393724 but saw there were some changes needed. There was a recommended revision by Petros @Mach0gr to stretch the blade 120% and flip it around which worked well. The…
P
Printables
Xiegu G90 Side Retainers
I took the front loops off of my Xiegu G90 to make it fit better in my backpack. But then I found that those loops helped keep the radio from sliding off the Clip-on Stand that I like to use. Without them the radio could too easily slide…