110/220V LED Spotlight/Grow light. up-to 20W, Cheap 5$, Small
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A super cheap and simple high power LED light. MADE TO USE WITH MAINS VOLTAGE! IF YOU DO NOT HAVE SKILLS/EXERIENCE…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A super cheap and simple high power LED light.
MADE TO USE WITH MAINS VOLTAGE!
IF YOU DO NOT HAVE SKILLS/EXERIENCE PLEASE DO NOT MESS VITH HIGH VOLATGE!!!
The heatsing at full fan speed can support upto 20w, I tested 30w but the i could feel the plastic case warming up. The fan is audiable at full speed, but turning the fan speed down to silent is still more than enough to cool a 20w led.
I used a 1k potentsiometer in series with the fan to turn down the speed.
When using a 10w LED chip the fan can be turned almost all the way down.
The parts i used:
The heatsink fan combo: https://s.click.aliexpress.com/e/_AKWH0P ---2$---
C8 (220v connector): https://s.click.aliexpress.com/e/_AKAtgf (5pcs) ---0.9$---
220v/110v to 12v converter for fan:https://s.click.aliexpress.com/e/_9yWyYT ---0.5$---
(select the 1-3w version)
220v LED driverless: https://s.click.aliexpress.com/e/_AsEQGj ---1$---
(i used a grow LED light but you can find your own just make sure
the chip is 220v driverless)
TOTAL: about 4$ Of course some prices may vary, shop around a bit and find the best price.
Many different LED chips should work since the sizes are more or less standard.
I just use some super glue to stick the led chip to the heatsing. Using some heatpaste would be good, but i find the glue does good enough job for low power like this.
If you feel comfortabe with the mains voltage then the wiring should be simple enough :)
I bought this kit and that's where i got the speed controlling potentsiometer from: https://s.click.aliexpress.com/e/_9fxQVl
Printed with 0.2mm layer high, no support and whatever infill.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: The cheapest PLA Whatever you like
Category: 3D Printing