Chaos themed Tiered Paint Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiered Paint Caddy for hobby spaces that get packed up. Khorne themed because why not.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I really wanted a cool tiered paint holder but without a dedicated hobby space I needed to be able to put it all away every night so I made the tiered paint caddy. After offering to make one for a friend who exclusively uses citadel, they asked ‘can it be Khorne themed?' and here we are.
Although I made a vallejo compatible insert, this was originally sized for citadel paints, that being said there is not enough room for the slightly taller brand on the top tier of the bottom section (2nd from the bottom). Because I only have a few citadel paints myself this is pictured above.
You will need to use supports for the overhangs on each of the slides, they can be a little tricky to remove and you will want to give the sliding areas a light sand on each piece. I have printed this in both PLA and PETG no problem.
The pieces are assembled using the wedges attached in the files. The side on the print bed should go against the side of the caddy so that the ridges on the tapered side catch and lock in. The handle uses 2 opposite facing wedges on each side. I've included the wedges separately incase you lose them before assembling but the wedges needed are part of the file for each piece.
Paint for the Paint God.
Modeled in Tinkercad