case / housing arduino Uno with a Nextion Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
housing for arduino uno and a Nextion NX4832T035 - 3.5" HMI TFT LCD Touch Display Module
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
About the project:
This is a alle in one housing for the arduino uno with a 3,5" Nextion display.The housing has two cable outlets that are screwed on. The whole housing can also be attached to a surface with four screws. In the housing there is space for the display cable and the cables of the Arduino.
Support :
All my designs and mods on Printables are free to use and can use in other ways. They have a non-commercial license. If you enjoy my designs you can send me a small donation using the link below. Thanks you.;)
https://www.paypal.com/paypalme/TheNoroky
parts list:
| quantity | name | remark |
| 1 | arduino uno screw shield | link |
| 1 | arduino uno Rev 3 | link |
| 1 | Nextion Display NX4832T035-3,5 Zoll | link |
| 8 | threaded inserts | link |
| 4 | M3x6mm flat head or lens head | |
| 4 | M3x50mm flat head or lens head | |
| 1 | housing bottom | printing |
| 1 | housing top | printing |
| 2 | cable gland | printing |
| 2 | locknut | printing |
| 2 | screw cap | printing |
