1 / 4
case / housing arduino Uno with a Nextion Display — image 1
1 / 4

case / housing arduino Uno with a Nextion Display

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

housing for arduino uno and a Nextion NX4832T035 - 3.5" HMI TFT LCD Touch Display Module

Rating
0 / 5
Likes
5
Downloads
54
Makes
0
Views
576
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

 

 

About the project:

This is a alle in one housing for the arduino uno with a 3,5" Nextion display.The housing has two cable outlets that are screwed on. The whole housing can also be attached to a surface with four screws. In the housing there is space for the display cable and the cables of the Arduino.

 

Support :

All my designs and mods on Printables are free to use and can use in other ways. They have a non-commercial license. If you enjoy my designs you can send me a small donation using the link below. Thanks you.;)

https://ko-fi.com/raskarion

https://www.paypal.com/paypalme/TheNoroky

 

parts list:

quantitynameremark
1arduino uno screw shieldlink
1arduino uno Rev 3link
1Nextion Display NX4832T035-3,5 Zolllink
8threaded insertslink
4M3x6mm flat head or lens head 
4M3x50mm flat head or lens head 
1housing bottomprinting
1housing topprinting
2cable glandprinting
2locknutprinting
2screw capprinting

 

 

 

 

Tags