1 / 11
HIVE Palm/Wrist Rest (330mm x 80mm x 19mm) — zdjęcie 1
1 / 11

HIVE Palm/Wrist Rest (330mm x 80mm x 19mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A PLA/PETG HIVE-inspired palm rest designed with interchangeable TPU plugs to allow for customization.

Ocena
5 / 5
Polubienia
60
Pobrania
154
Wydruki
3
Wyświetlenia
1299
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I've designed these dual-material HIVE palm rests to match my 75% mechanical keyboards (specifically Keychron's Q1 and V1).

Video: https://youtu.be/W3amrgXQBYA

Key Features:

  • 75% sizing (w: 330mm, d: 80mm, h: 19mm max @5º slope)
  • Dual material: PLA/PETG core + TPU hexagonal plugs
  • Split design: Divided to print on a standard i3 bed
  • Interchangeable plugs - swap to suit your needs

Print Considerations:

  • Print inverted: The surfaces that touch your palm when in use should be in contact with the build plate
  • No supports
  • Brim for the PLA/PETG core

Parts:

  • Hive Core:
    • Recommended PLA/PETG material
    • 2 components (left + right sides)
      • I have included an “Intact” STEP file in case anyone wants to print the entire core in a single piece on a larger printer
  • Hexagonal Plugs:
    • Recommended 85A/95A TPU
    • 14 components
      • Central core (large piece to connect two halves of the Hive Core)
      • Central plugs (numbered 1-7, insert from the back such that the numbers are legible - see images)
      • Side plugs (labelled L1-3, R1-3: for the left + right ends of the palm rest when facing the user in the in-use orientation)

STL and STEP files have been shared, as well as PrusaSlicer files for both the PLA/PETG Hive Core and a complete set of TPU Hexagonal Plugs.  Please reference this for my specific print settings and orientation.  If you are going to start a PrusaSlicer file from scratch, don't forget to use the “split to objects” command to divide the shared files into their constituent parts.

Enjoy! And please share images of your makes to show others what colour combinations you've selected!

This design is shared with a non-commercial license. The only exception is my personal Etsy store: Infill Innovations.

Tagi