Bambu Lab X1C/P1P/X1 - Interior Poop Chute Cover/Seal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A seal to cover the gap between the interior volume and poop chute of X1C/P1P/X1 Bambu Labs by Tylerebowers!
- Ocena
- 4,667 / 5
- Polubienia
- 212
- Pobrania
- 1099
- Wydruki
- 31
- Wyświetlenia
- 7747
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
There's a big gap between the poop chute and the interior volume wall. If you look from the side, you can directly see the electronics, meaning that hot air from the printing volume will go to the electronics and also cooling air from the electronics might easily get to the printing volume. This amazing design will close that air to try and remain both zones more separated!
Print this in ABS, ASA or above preferably. PETG might be sufficient, but could warp overtime.
This model was originally uploaded from Cults and original creator is: Tylerebowers (https://cults3d.com/en/3d-model/tool/bambu-x1c-poop-chute-cover). This is so nice that I decided it would be worth having here on Printables!