Ram mount 1 inch ball m8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ram mount compatible 1 inch ball with stem for M8 screw
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 340
- Wydruki
- 0
- Wyświetlenia
- 1566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I needed a Ram Mount compatible 1 inch ball that would accept the M8 bolts that come in the Ram motorcycle kit RAM-B-367U that also works well in the Suzuki Jimny JB74 for mounting accessories on the dash. Bolt head(s) that come in the kit sit near flush with the ball.
For mounting in the Suzuki Jimny JB74 Sierra: the kit is supplied with 3x M8 bolts (lengths 55mm, 60mm, 65mm). This print allows the 55 and 60 to be used without cutting the bolt. The 65mm length needs a little trimming (remember to thread a nut on the bolt before trimming to help straighten out the threads).
Specs on my printer with PF Black PLA
Ball 25.1mm
Total height 41.8mm
Bottom width 16mm
Bolt M8 with head width 12.9mm, height 7.9mm.
I printed with a 15mm brim and 0 separation.