1 / 5
FCX24 Power Wagon Wrecker Truck
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FCX24 wrecker truck inspired by Matt's Offroad Recovery’s world's biggest offroad wrecker, with man-powered winch
- Ocena
- 0 / 5
- Polubienia
- 67
- Pobrania
- 384
- Wydruki
- 0
- Wyświetlenia
- 2765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (22)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (76)Powiązane
FMS FCX24 Power Wagon wrecker truck inspired by Matt's Offroad Recovery’s world's biggest offroad wrecker, with man-powered winch.
[Instructions]
Slicer setting for winch gears (both L and S), select "concentric" for top/bottom pattern.
Widen the pulley and stopper holes with a 2 mm drill bit.
M2 bolts and nuts are needed to install following parts;
- Pulley L: 14mm M2 bolt and nut
- Pulley S: 10mm M2 bolt and nut
- Stopper L: 12mm M2 bolt and nut
- Stopper S: 6mm M2 bolt
- Stanchion: 4mm M2 bolt to tie off the end of the crane wire
For the crane wire, use thin, strong wire like that used for beadwork.