Extrusion multiplier Blocks with numbering 80-110 for Ellis' Tuning Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
much easier to determine thanks to numbering
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
For those using Ellis' Print Tuning Guide to tune their flow, this could be very helpful (for me it's the best way so far)
who does not know it you have 6 blocks on the printing bed, take them down to check them and suddenly you no longer know which was which
That's the end of it. I've numbered all the blocks from 80 to 110 so that you now know exactly which one is the right one
the basic block still has the dimensions 30x30x3 and you can also take the settings from the guide as usual
the number in front is only 2 layers high, the print time per block increases by only a few seconds (depending on your print speed)