Hunting Rifle Scope Sun Shade Long Slash Cut Ribbed v4 To Suit 50mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip on sun shade for rifle scope (Scale-able)
- Ocena
- 0 / 5
- Polubienia
- 73
- Pobrania
- 286
- Wydruki
- 0
- Wyświetlenia
- 1753
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
After not being able to find a design i liked i designed my own sun shade. This is v4
This was built to fit a Millbro c4-12x50eg with a 57mm outer diameter.
You can scale the X and Y axis to suit your required diameter and measure using the Prusa Slicer ruler tool.
This is 57mm ID and will fit snug if your printer is well calibrated, if unsure you have 2 options. 1- print slightly over sized and use electrical tape to create a snug but forgiving fit. 2. print 5mm high, stop the print and test fit the piece.
I printed this at 0.1mm layer height in abs black so i could vapor smooth it. it will work in any filament you used probably tpu too!
