Bag Clip with Screw Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Bag Clip with Screw Cap designed by Minkix ist great.
- Ocena
- 5 / 5
- Polubienia
- 155
- Pobrania
- 1266
- Wydruki
- 12
- Wyświetlenia
- 6022
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The Bag Clip with Screw Cap designed by Minkix ist great. However there are some Things I wanted a bit different, so i constructed it by myself.
It works best if you print Cap and Insert at 99,5% and the Clamp at 100,5%
Version 1.4
It doesn't work at the moment, I'm currently working on the swivel.
Printing a test print right now..... (10.01.2020)
Version 1.5
Swivel is now working, after changing the geometry. But its a bit lose, changing it again.
Printing a test print right now..... (11.01.2020)
Version 1.8
Now everything is working as intended (18.02.2020)
Print instructions
Unassociated tags: Bag Clip
Category: 3D Printing Summary
The Bag Clip with Screw Cap designed by Minkix ist great. However there are some Things I wanted a bit different, so i constructed it by myself.
It works best if you print Cap and Insert at 99,5% and the Clamp at 100,5%
Version 1.4
It doesn't work at the moment, I'm currently working on the swivel.
Printing a test print right now..... (10.01.2020)
Version 1.5
Swivel is now working, after changing the geometry. But its a bit lose, changing it again.
Printing a test print right now..... (11.01.2020)
Version 1.8
Now everything is working as intended (18.02.2020)
Print Settings
Rafts:
Doesn't Matter
Supports:
No
</div>Resolution:0,18
Notes:
Everything has to be rotated -90° around X