Scubapro nova 200 dive lamp hand mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hand mount platform, to hold the Scubapro nova 200 torch
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Hand mount platform, to hold the Scubapro nova 200 torch
Print instructions
Category: Sport & Outdoors Summary
Hand mount platform, to hold the Scubapro nova 200 torch
Instructions
-Print the hand mount platform. Remember to print the infill solid! You wont have air enclosures.
-Grab a piece of belt, mine was from an old shopping bag, about 20cm/8inch.
-Sew a piece of left- and right-handed Velcro onto the belt.
-Pass one end of the belt through one slot of the platform, flip over and sew together.
-Grab a piece of rugged elastic cord. Thread according to the picture.
-Secure the torch on the platform, using the belt.
-You can fix the platform on your hands back by twisting the elastic cord around the neck of the torch. I salvaged later a cord stopper from a defective rain jacket, this is a much more comfortable solution.