Segway i2, X2 Remote 1200mAh Lipo battery upgrade with USB-C and QI Wireless Charging
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Never run out of battery on your Segway remote angain. No more Primary 3V button cells. Charge with USB-C and QI
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of having to swap 3V coin cell batteries on your Segway X2/i2 remote?
This design converts the Segway InfoKey to a 1200mAh lipo battery with 500mA USB-C and QI wiress charging.
- Takes 1h15m to print on the MK4 with InputShaping
- The internals are simple components from Adafruit. It does require some soldering.
- Everything is fitting tightly and fixed in place with superglue or epoxy
- Full charge is around 2 Hrs.
- Cover the PCBs with epoxy or glue for better weather resistance
- Lanyard Hole
There is a LED indicating status
- RED Charging
- GREEN Fully Charged
- RED+GREEN Battery Error
Printing:
There are two passes:
- Body and lid - Solid filament
- Lens - Transparent filament for the LED Lens/lightpipe
I used Prusament PETG with my MK4 with Input shaping, 0.2mm layer height.
For body and lid: Organic automatic paint on Supports (under the ring bridge and the usb-c connector opening)
I used 40% infill, 3 perimiters, except bottom layer 1 perimeter for better QI logo.
For lens I used Transparent PETG, 100% infill, concentric, no support, lens top facing plate.
Components:
3.3V Regulator for regulating voltage to emulate 3Vbutton cell battery
https://www.adafruit.com/product/4711
USB-C LiPo 500mA charger
https://www.adafruit.com/product/4410
1200 mAh LiPo battery
https://www.adafruit.com/product/258
Universal Qi Wireless Receiver Module
https://www.adafruit.com/product/1901
Small gauge wire: 4 x approx 10cm - 1 x approx 3 cm
Superglue or epoxy