763 modeli
Con esta plantilla podrás interpretar el estado de la nivelación de la cama en tu impresora Ender 3v3 SE. Ten en cuenta que si el Offset z da malos resultados en la nivelación en tu maquina, tienes que buscar las razones por las cuales…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
The Latest D3vil Burner for Knomi V2 !! Introduction D3vil Design Burner for Knomi V2 , this model is made with lower colling ducts ( i will try to update it with a higher version later. Features - Drop in replacement for the Creality K1…
Enjoy the sight of a better frame stability (Not tested for K1 Max) Preferred to be printed in PLA+ , Hyper or PETG .. it’s a perfect fit so printing it in ABS will shrink and might not fit properly. Important: Fits K1 and K1C perfectly…
Note: the New KnomiV2 files are available now !! The long awaited D3vil Burner by the D3D team, featuring Knomi support, is here! **Introduction** D3vil Design is proud to release the D3vil Burner toolhead cover for the Creality K1 for…
This model is created from three parts - Body , bottom par t and upper part magnets must be inserted into the holes after printing the model - you will need 12 magnets of size 5X2 mm and 2 magnets of size 4X2 mm. you will also need a pen…
X gantry model I recreated of the Ender 3/pro/3v2/CR10 (v1) Holes are perfectly aligned, I then used this to design shrouds (like the MarsOrbiter, SaturnOrbiter and ApolloLander, of which I never received any complaints regarding mounting…
Hello, I've designed and made this bearing. It works i pretty good:) I've made various designs but this one works the best for me now. I use 4 of these on my spoolholder for a smoother feeding to my extruder. **Fixed the issue that the…
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
My goal was to maintain the eye-catching design while incorporating a better ventilation system. Caution! The model may have some errors or design imperfections. I'm not an expert in 3D modeling. For assembly instructions, refer to the…
Somehow my factory tension housing cracked and I wanted to just print a replacement vs buy something GalvanicGlaze on Thingiverse posted a basic external shell which I modified to have the appropriate internal components for the…
The best thing about the Bambu is the fact that once you hit print, you forget about it ,,,, and then you notice that there was some extra filament from the previous print stuck at the side of the nozzle, also with the scary noises it…
Please Like and Download my design so I have a chance to get Prusameter bonus, thanks ! A small and easy to print clip, to hold the Bowden tube and the cables together. Fits Ender 3, 3Pro, 3v2, CR-10 Voxelab Aquila, and in fact any…
Has both the V1 and V2 Knomi. Post your makes for a chance to get featured!
Fits a DC Motor with a 2mm shaft.
Ender 3 or similar belt tension system. You can use Mellow pulley or cheap chinese pulleys (use spacers accordingly). Screw in M4 screw in “BELT_TENSIONER_INSIDE” part, length as needed. For belt tension use my belt tension knob from:…
I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
Printed lying on its face. 3 walls and 3 top/bottom. 15% grid infill. Very solid, but the pin version isn't great imo. For V2 you will need supports as shown in the photos.
After the bed calibration with sheet of paper I recommend you print a first layer calibration test for better ressults in your 3D prints. Printer Ender 3V2 Material: PLA
Update 2024-01-17 - Added the STEP file. Sorry for the delay on this, kept forgetting. I don't have a lot of time to make edits, so feel free to remix - Just make sure you credit the original. Happy tinkering! Update 2023-02-18 - Added…
A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.
After I installed a BL touch I realized that I could use the z end stop switch as a filament runout sensor. It was basically a free upgrade and it's nice to not have to worry about running out of filament when you're getting to the end of…
Required parts: 2x M5 x 16mm 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings The washer should go between the top bearing and the printed adjuster. Snug the M3 x 12mm screw, but do not tighten it. The bearings should spin freely. If you don't…
Screen Knob for the Ender 3v2 and others using the same OEM knob. Knurled style matching my other Ender 3v2 Knobs linked below... ❤ Get your Prusameters… Post your Makes! ❤ You can find my other matching Ender knobs here: Drawer Knob:…
I found that if you have to remove the end caps for any reason they are easy to break if not careful, so I decided to recreate them in fusion 360 to be an exact fit so they can be printed in any color of your choice and if you so choose…
Remix from existing designs, i would like a hub generator to enable everyone to do it own. Hubs works with 1V, 2V, 3V, 4V, 5V, 6V geodesic dome Strut profile : rectangle or round use Dromerama calculator to get Strut sizes :…
Extended lower and upper corners to fit Ender 3v2. Printed with PLA Print: 0,2 mm layer height, 0,4 mm nozzle, 40% infill. Supports only on the lower corners on the 90° overhang.
Ender3V3KE CR ADXL quick mount without extra screws, just using the 6 screws that coming with the sensor.
This is a remix from Stefan . He made a nozzle wiper for the original Ender 3, but that one doesn't fit the v2. This one does now. It attaches to the two bolts on the right side of the X-axis and requires no modification to the printer.…
apologies for the delay in posting this … This it a beta Version , kindly do test it and let me know if you have any suggestion ,, ill accomodate them … If you are interested in developing it further please do contact me on Discord…
The original version printed beautifully but was ever so slightly too big. After seeing comments of others having to grind or sand down a lot to make it fit, I took the model and in tinkercad and just made the track part 0.25mm slimmer…
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…
You can use a z offset like -2.30, it's a standard for this braket. The firmware is already compiled and you can flash the printer easy, dont forgot to flash the display, it's easy. all files is included. The model it's easy to print, i…
I am working on a gearbox for 3v hobby motors, and needed a model of those motors to design around so I made this one. I worked with the drawing from here , which is partial and may not represent all variants of all manufacturers. I did…
A simple but functional remix of this great Design, intended for those who have the Lidar attached to their K1 Series. Added a left side window for the Lidar cable / connector, keeping the style and functionality of the design. Printed in…
Solid and cleanly mounted cable chains for all axes of the Ender 3 Does not limit the movement of the any axis! I recommend to use ABS or PETG, especially if you use an enclosure. Cable Clips I use in total 47 cable clips: x axis: 12 (13…
Понравился дизайн,переделал для Ender 3v3, тем более для этого принтера вовсе нет никаких крышек,а моя сломалась... Скрестил оригинал и от k1.
Drawer Knob for the Ender 3v2. Knurled style matching my other Ender 3v2 Knobs linked below. WARNING: This is a delicate knob to replace. If the tabs breaks, try another/stronger filament. Installation: Remove drawer, press tabs inward to…
I found that printing the wind turbine blades so that they were perpendicular to the bed works best. Make sure to add a brim as nozzle has a tendency to pull the blade off the bed the taller the print gets.
Slightly modded version to make it more easy to print
A fully printed 3V Geodesic Dome approximately 40cm diameter. Colour coded for ease of assembly. Please note the orientation of Joiner B (Colour: Blue) which has an arrow geometry designed in the joiner/connector. The installation of the…
Ho dovuto praticare un altro foro nella stampante per avvitare il bullone e tenere la porta
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
Remixed the original 5015 fan duct and slimmed the left duct down to make room for the CR Touch Also added a slot for an M3 nut to utilize the rear mounting hole from the original duct Category: 3D Printer Parts
Used community 3d model of 3v3 KE to add some of my own mods and some other popular mods like @NeedItMakeIt Z support and linear rails u can upload whole model in Fusion and then export what u need to print. 2.1.2026. Added more stuff…
Clips on the Gantry, Prints in 2 pieces, there are 2 ‘keys’ one is slightly larger, find the one that fits best and press the 2 halves together over the key. if you print with supports, they will go into the keyhole, but they do dig out…
For those of you who like to design new parts for your Ender 3 v2, but don't have a reference model with all the dimensions. There is a handful of other models, however, they all are distributed as .stl/.step files. Even worse, some of…
Narychlo vymodelovaný stojánek na mobil, inspirovaný produktem 55-66-88 z Kickstarteru.
Remix of new Satasana dual fan duct with Ender 3v2 mounting hole
This is a simple carrying handle that will attach to a 2020 extrusion with 2x M4x12 screws and T-nuts. I use it as a carrying handle for my Ender 3 V2. The CAD document is on Onshape and is public for anyone who wishes to edit the model…
This part needs no screws, it just sits on the top extrusion of the Ender 3V2 frame. It fits one ball bearing with outer diameter 24 mm and inner diameter 8 mm, for example SS-628-ZZ Print it the same orientation it will sit on the frame,…
Small pillar support required at rear only
The “Generic Steel Sheet Holder” from Fluid does not fit for my Ender Buildplate Sheets. So I remix the holders from the scratch. STEP-Files provided. Feel free to remix. My Print-Settings: 0.2mm PLA “Bavaria Filament” Silver Support: No
This is a rough collection of the models that I used in my Ender 3v2 IDEX conversion. Hopefully the ideas are useful to inspire additional builds. It was definitely more fun than serious and most of the parts were chosen simply because…
Prints fine without supports. Turn on ironing to clean up the inside faceplate that actually makes contact with the rg353v. I used a roll of felt tape to line the inside from amazon. This is really rough as this is my first remix but…
Designed this for my Ender3v2-Remake , you only need to print one file and can use the bearings and the knob with this model. The original screws can fit, but I suggest new (longer) ones . Alternavely you can modify the included…
Snap in cover for the Devil burner without a knomi. Inspired by https://www.printables.com/@_426685 and modified with a coaster design from https://www.thingiverse.com/bluegoo192
This is a remix of Pixel 3D's Stock Ender 3 Printhead and Backplate found here: https://www.printables.com/model/514635-stock-ender-3-v2-stealthburner-with-4020-cooler-fa/ Changes include: Added heat inserts, cable management to printhead…
Pretty straight forward build for keeping your print area cleaner. The amount of small bits of plastic that comes from printing is aggravating. Vslot clovers are nice to keep that area clean, but the whole printer gets dusty and covered…
Hallo zusammen, hier teile ich euch meine Halterung für die Z-Achsen Spindel. Ich habe diese Halterung konstruiert, damit ich kein Wobble mehr in meinen gedruckten Teilen habe. Als Lager habe ich ein 608RS genommen. Welches einen…
I'm really like the original miniSatsana Light, but the design interfere with BLTouch steel-mount from Creality that already attached to my Ender3v2, rather than messing with BLTouch offset, I remix the original design so it can be use…
Really liked the original design for fitment and wanted to use the same 80x25 mm Noctua NF-A8 ULN, which is almost inaudible. However I felt that the side vents weren't as effective as I liked them to be. Therefore i added some vents into…
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
I really liked the 80mm design by CyberwareDK over on thingiverse. An 80 mm fan with good ventilation holes is plenty enough for the PSU and the Noctua NF-A8 ULN is almost inaudible. However the original design had no Fanguard, which I…
3D printable dock designed for the Anbernic RG353V handheld gaming console. This dockholds the console during storage or charging. The dock includes a channel for a type c cable. Prints fine without supports.
The rubber casing of the original key was braking by the keyring hole. Inspired by Dontown 's : https://www.printables.com/model/39576-vespa-key-repair Had to remodel ex-Novo for a larger and different type of key. Added a lip on the…
For Creality Ender 3V3SE, the Nebula Pad holder, taking into account the installation of a filament spool holder behind it. The holder is more vertical and away from the center. I recommend printing PETG Speed 30-50 Density - 25,…
Bed leveling/tramming+create mesh .gcode for Ender 3V2 by Teemo3D | PRINT3D GIFTS Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Notes: Bed leveling/tramming+create mesh .gcode for Ender…
Remix of parts of two main board boxes. This is set up to hold SKR Mini E3V3, RPI, U2C Canbus and LM2596 Buck Converter Mount holes are at 2.80mm so should self tap M3 Holes on the right of the case are for M5 Heat Inserts RPI fan is for…
Filament guide for Ender 3v2 converted to sprite extruder. Uses the cable support arm below. https://www.thingiverse.com/thing:5403565 Print Settings Resolution: 0.28mm Infill: 15% Rafts : No Supports: No Filament: PLA
This is a remix of the extruder mount for these cable chains while using the Ender 3 filament runout sensor. You will have to replace the screws with M3x20mm.
Update-- added fan guard. use 2 23-25mm m3 screws to secure. Make sure to either drill out or tap the holes in the fan guard, and tap the holes in the fan duct for a proper fit. Remixed version of https://www.thingiverse.com/thing:4647053…
All Sentry 3V8 siren parts here If you are going to use this model for your own model, make sure the license matches and that you give me credit. HOW TO BUILD: 1: Measure your motor's dimensions and modify the stator and rotor if needed.…
Remixed in Blender. I connected Redbluebear132 's Glados head to Greco1970 's V-slot base. Articulated via soozafone 's Lucky 13 armature pieces. In files, check how long you want the neck and insert pieces in the slicer accordingly. Be…
Remix of the original v2 D3vil Burner Cover with hex cutouts instead of the fractal cutouts on the sides.
Update 27/4/2023 added klipper config and superslicer config of my printer for you guys <3 This model is a remix model that I edited from the X Carriage Frame of team Voron that use for Voron Switchwire. I love the design of Voron…
NOTICE: This was designed to be the thinest adapter cover that will still allow for a USB connection using adapters. This is not a part for the faint of heart. It does require some effort to get the SD Adapter to line up. Folding ribbon…
Test 1 warstwy dla drukarki o polu roboczym 220x220x220mm W tym wypadku Ender 3V3Ke
Hola buenas esto es un perfil con impresora,filamento y más para la Ender 3 V3 SE ,si tienen alguna sugerencia mensaje.imprime muy bien boquilla 0.4 espero ayudar.
🔥 Upgrade Your Creality K1 with Style and Functionality! 🔥 This is a remix of the D3vil Wears Prada for K1 Series Creality mod, specifically modified to be compatible with the Creality K1 Honeycomb-style Side Mounts Kit . If you're using…
No print support! https://www.phaetus.com/en-us/products/dxc-extruder The motor is not included as it's meant to be a drop in replacement for the Creality K1 extruder. Needs to be 12t gear (the common motor for Sherpa and Orbiter uses…
Ender 3 V2 front case for BTT TFT35 SPI no support needed, but you do need to tap the aluminum extrusion to accept screws
This is my 1st remix of the original Stealth burner from Voron to suit the Rapido UHF with the extension UPDATE 29th Jan 2023: STEP FILE UPLOADED, for anyone interested to play around with the design or to add your own logo… Keep in mind…
The fan is mounted on a ball and compression fitting to allow adjustment of fan direction. vertically and horizontally. I used an adjustable voltage supply set to 3 volts to limit the current to 2 amps. The air velocity is reasonably…
Display stand for the retro gaming devices Anbernic RG353V and RG353VS.
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
This mount is made for the TP-Link Tapo C100/110 camera in combination with a Creality Ender 3V2 3D-Printer. The mount is screwed with two M5 screws onto the existing y-axis belt tensioner. You will need to swap the original screws, which…
This case may not be compatible with ender3s with shorter pads. My ender3 measures 45 mm from the underside of the Y-carriage extrusion to the table, while this case measures 42 mm. Additional Hardware 4 M3x16 (Cover) 4 M3x6 or M2.5x6 for…
Want to show appreciation? Consider checking out my Ko-fi This is a fairly simple mod that joins the BTTEddy Mount remixed by @anavrin72_1904362 and joins it to the K1 D3vil Burner & Booty Burner cover by @MzTechnology_2076066 I have also…
Created using Fusion 360
print 2x dryer top the other 2 parts 1x i printed with pla 0.4 nozzle 0.2 layer hight
LED light, LED svetlo Ender 3v3 KE
Basic Skadis mount for the Anbernic RG353V/VS. Supports needed for Skadis Pegs. Included STL, F3d, 3mf files. Used IKEA Skadis Fusion 360 Double Hook: https://www.printables.com/model/118225-ikea-skadis-fusion-360-models/files
This was a quick design to align the magnetic bed (235x235) of my ender 3 V2. Holds to the bed screw. Recommendation: print for 2 corners (right front and back) for better alignment.
Deutsch: E3V2 Modell als Cura Röntgen-Buildplate einrichten !!!UPDATE!!! Scheint nicht mit Cura 4.11 zu funktionieren. ich arbeite an einer Lösung! HALLO COMMUNITY ICH WOLLTE EUCH HEUTE MAL ZEIGEN WIE MAN SICH DEN ENDER3 V2 IN CURA…
Could not find one that i like and fit. Cover with and without Voron logo. 08.04 added closed versions
Heel or toe for Prada shoes, I don't know which name is better I would be very grateful if someone could send me a more decent photo for the model's page :)
