1 / 8
Magnetic fidget toy  - finger gun 3V1 — zdjęcie 1
1 / 8

Magnetic fidget toy - finger gun 3V1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

it is a very good fidget toy

Ocena
3 / 5
Polubienia
400
Pobrania
1921
Wydruki
1
Wyświetlenia
27 409
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

 

  • This model is created from three parts - Body, bottom part and upper part

 

  • magnets must be inserted into the holes after printing the model - you will need 12 magnets of size 5X2mm and 2 magnets of size 4X2mm.

 

  • you will also need a pen spring

 

  • magnets need to be glued to the model

 

  • I used 0.4 nozzle, 0.15 mm layer height and 20% infiltration.

 

  • you need to print with supports.

 

  • I printed it on Prusa MK3S and I used prusament

Tagi