1 / 4
120mm Noctua fan shroud/spacer — zdjęcie 1
1 / 4

120mm Noctua fan shroud/spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small duct for the front of your PC case

Ocena
0 / 5
Polubienia
16
Pobrania
81
Wydruki
0
Wyświetlenia
1339
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This came about as i had just installed new noctua case fans in my pc. They have such an improved flow rate that they drew in the front filter and caused a buffeting noise. (yes the filter was clean)

So I then mounted the fans to the inside of case, problem solved, except there are now many places for air to be drawn in unfiltered.

Hence the shroud was necessary to duct air predominantly from the filter.

Its far from perfect as far as gaps are concerned but does the job much better than nothing, and the PC is whisper quiet now.

Use the original fan mounting screws to install.

Tagi