Samla drybox <10% humidity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on making the IKEA Samla box into a dry box for 4 rolls of Prusament.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 1558
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Update
Added a feeder for the larger ptfe tube ends
A dry box made using a ikea samla storage box. It holds 4 spools and with 250g of silica gel I managed to get a humidity level of <10%
I used these items to assemble:
https://www.amazon.se/-/en/RUNCCI-YUN-Fittings-Straight-Pneumatic-Connector/dp/B07RFHB8RR/ref=sr_1_5
https://www.amazon.se/dp/B07HGXXX37?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B07GR65CNT?psc=1&ref=ppx_yo2ov_dt_b_product_details
The spool holders are made from a M8 threaded rod, the bearing shrouds go on the bearings and the bearing spacers are placed between them. I used nuts on each end of each wheel cluster to keep them in place.
Pro-tip: use these to close the PTFE tubes off, from my experience it created an airtight seal.
https://www.printables.com/model/2940-ptfe-tube-cap-with-filament-catch