1 / 16
P802ma Tronxy A8 clone upgrade parts — zdjęcie 1
1 / 16

P802ma Tronxy A8 clone upgrade parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch ) as…

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
544
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch )

as well vertical hulk braces with hexagon decor designed to hit all the precut screw holes inteh acrylic frame.

this adds rigidity to the frame and nicer prints.

i have used some other mods but i am remixing them to be integral parts. and will add them to this collection of upgrades that are more than just aesthetic

Print instructions

Category: 3D Printer Parts Summary

Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch )

as well vertical hulk braces with hexagon decor designed to hit all the precut screw holes inteh acrylic frame.

this adds rigidity to the frame and nicer prints.

i have used some other mods but i am remixing them to be integral parts. and will add them to this collection of upgrades that are more than just aesthetic

Print Settings

Printer Brand:

Anet

Printer:

A8

</div>Rafts:

No

Supports:

Doesn't Matter

</div>Resolution:

.2

Infill:

15%

</div>
Filament:

Amazon Basics PETG PETG orange

Notes:

5 top/bottom/side layers (for strength)
260 deg

80 deg bed

lower them 5 degrees after first two layers.

print speed was 100% at 55mm/s
with 101% flow

Gyroid infill (may have upped it to 25% but as long as you are hot and fat on your lines it should be plenty strong enough

Tagi