P802ma Tronxy A8 clone upgrade parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch ) as…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 0
- Views
- 547
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch )
as well vertical hulk braces with hexagon decor designed to hit all the precut screw holes inteh acrylic frame.
this adds rigidity to the frame and nicer prints.
i have used some other mods but i am remixing them to be integral parts. and will add them to this collection of upgrades that are more than just aesthetic
Print instructions
Category: 3D Printer Parts Summary
Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch )
as well vertical hulk braces with hexagon decor designed to hit all the precut screw holes inteh acrylic frame.
this adds rigidity to the frame and nicer prints.
i have used some other mods but i am remixing them to be integral parts. and will add them to this collection of upgrades that are more than just aesthetic
Print Settings
Printer Brand:
Anet
Printer:
A8
</div>Rafts:No
Supports:
Doesn't Matter
</div>Resolution:.2
Infill:
15%
</div>Filament:
Amazon Basics PETG PETG orange
Notes:
5 top/bottom/side layers (for strength)
260 deg
80 deg bed
lower them 5 degrees after first two layers.
print speed was 100% at 55mm/s
with 101% flow
Gyroid infill (may have upped it to 25% but as long as you are hot and fat on your lines it should be plenty strong enough