P
PrintablesDJ_Foot
TronXY P802MA Part Cooling Fan Duct
Part Cooling Fan Duct upgrade for the TronXY P802MA printer Category: 3D Printer Parts
- Downloads
- 91
- Likes
- 7
- Rating
- 0
Search results: p802
Counting matching models…
P
Printablescdsmakestuff
Bed Leveling Thumb wheels (Large - TronXY P802-E)
If you find this useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff New larger thumb wheel design for my TronXY P802E. (sure it could be used with other things/printers as well). Appox. 30mm across x 10mm high…
- Downloads
- 80
- Likes
- 3
- Rating
- 0
P
Printablesboothyboothy
Zonestar P802QR2 X Axis Mounts
Zonestar P802QR2 X Axis Mounts In this remix I have: Manually repaired the STL files so that they are now printable (The file I downloaded appeared to have some mesh issues and would not print correctly. Optionally, I have modified both…
- Downloads
- 75
- Likes
- 8
- Rating
- 5
P
Printablesboothyboothy
Collection of upgrades for the Zonestar P802QR2
My Collection of mostly remixes\upgrades for the Zonestar P802QR2. I have uploaded a Obj and 3DS file with all the relevant 3D models included if anyone wants to improve them further . The things can be found at the folllowing links…
- Downloads
- 69
- Likes
- 6
- Rating
- 0
P
Printablescdsmakestuff
Bed Leveling Thumb Nut - TRONXY P802
Thumb nuts for bed leveling screws. Made as large as possible to accommodate large hands in tight spaces. Use M3 hex nut... hex fits snug in PLA Designed around TronXY P802E... Will probably fit other similar printers UPDATE: 3/9/2017 - I…
- Downloads
- 62
- Likes
- 7
- Rating
- 0
P
PrintablesJohn S
Tronxy P802E Y Belt Tensioner
Print this and it's mirror and bolt together using Tronxy's original hardware plus 2 m3 screws and nuts. Get the other parts from https://www.thingiverse.com/thing:2149867 Print instructions Category: 3D Printer Parts Print Settings…
- Downloads
- 53
- Likes
- 5
- Rating
- 0
P
PrintablesJohn S
Tronxy P802E Frame Braces
Frame braces I made for my Tronxy P802E that got rid of most of the wiggles. I made some revisions to a few parts after making the ones that are on my printer so some will look a bit different then in the photos. The braces on the front…
- Downloads
- 47
- Likes
- 2
- Rating
- 0
P
PrintablesJohn S
Tronxy P802E Bed Spring Kit
Having the bed shift on the wobbly springs mid print is very annoying so here is my answer. A cup part on one end and a post on the inside on the other. This tightly constrains the spring while still allowing plenty of adjustment range.…
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
PrintablesJohn S
Tronxy P802E X Mounts & Tensioner
I needed replacements for my mounts that were slowly deforming in my heated enclosure(40C) due to them being made from pla. Also, as is standard for Tronxy, the mounts came with warping by the threaded bushings that required me to shim. I…
- Downloads
- 40
- Likes
- 2
- Rating
- 0
P
PrintablesJohn S
E3D V6 Part Cooling Duct for Tronxy P802
This is a new and improved cooling duct design for my E3D V6 mount design https://www.thingiverse.com/thing:2536764 that I made for my Tronxy P802E. This duct is much smaller than my crazy wide duct I posted initially. It is half the size…
- Downloads
- 40
- Likes
- 1
- Rating
- 0
P
Printablesboothyboothy
Z-axis upper brace for Zonestar P802QR2
This is a remix of a Z-axis upper brace with bearing by nilocwng but for the Zonestar P802QR2. You will see need a pair of bearings. I got mine from the following site:…
- Downloads
- 38
- Likes
- 4
- Rating
- 0
P
Printableszuim
Pen plotter - draw on paper or create pcbs Zonestar p802
This is a pen holder holds pens with ~10mm diameter and is installed instead of the proximity sensor on the right side of the extruder. This allows for fast switching between regular printing and pen holder mode. You can use it to create…
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
PrintablesPaul C
P802ma Tronxy A8 clone upgrade parts
Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch ) as well vertical hulk braces with hexagon decor designed to hit all the precut screw holes inteh acrylic frame. this adds…
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
PrintablesJohn S
Tronxy P802 Bed Carraige Upgrade
This is a simple thing that I changed on my Tronxy P802E that made a BIG improvement on getting a consistent bed level from print to print. I replaced the horrible acrylic bed undercarriage with a solid homemade aluminum one. I went with…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
Printablesboothyboothy
Zonestar P802QR2 60mm Fan Duct
Zonestar P802QR2 60mm Fan Duct About the only thing I have not had problems with the Zonestar P802QR2 is layer cooling so this thing may be a little OTT. The thing was inspired by a comment from the9rtyt regarding using 2 fans for…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesDan Murphy
Tronxy p802e power supply cover
For the S-240-12 model psu. Printed at 100% infill and .3mm layer height. Recommend to print upright with 10% support. There are different power supplies that come with these printers so look at the pics and make sure you have the same…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesJohn S
Y Motor Base Mount & Belt Clamp (Tronxy P802)
I made these to reposition my bed motor on my tronxy p802e. My old motor was wearing out and I wanted to make room for a better more powerful motor. Also, I wanted a better belt clamp that would make sure the belts were fairly level. The…
- Downloads
- 28
- Likes
- 4
- Rating
- 0
P
Printablesboothyboothy
Filament Guides for the Zonestar P802QR2
2 sizes of filament guides for the Zonestar P802QR2. The brackets attached to existing M3 screw holes in the main chassis. The Left guide includes 3 hoops for attaching cable ties to aid cable management above the motherboard. Collection…
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
Printablesboothyboothy
Zonestar P802QR2 Large Motherboard Enclosure for 120mm Fan
This is a Motherboard enclosure for the Zonestar P802QR2. I am still having some extruder shifts with my current fan\enclosure so I decided to design a much more spatially generous motherboard enclosure to accept a 120mm diameter stock…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
Printablesboothyboothy
Zonestar P802QR2 X Axis Extruder Mounts
This is a set of extruder mounts for positioning the Extruder Assembles on the Zonestar P802QR2 X Axis Carriage. The advantages of this are: 1.Reduces the Boden Tube length by a third and therefore reduces stringing (see uploaded image of…
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
Printablesboothyboothy
PSU Cover for Zonestar P802QR2
This is a remix of dfmsguitar`s excellent Power Supply Cover for the Zonestar P802QR2. In this remix I have Included more ventilation. Tweaked size slightly to accommodate the smaller version PSU. Included 2 tab returns to the back of the…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
Printablesboothyboothy
Z-axis lower brace for Zonestar P802QR2
This is a remix of nilocwng`s excellent Z-axis brace for Zonestar P802QA. I have increased the thickness of the base plate a little, extended the forward webs and threw in a few rads. This and the upper Z axis brace make a very big…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesJohn S
Tronxy P802E Z Rod Stop
The parts that came with the printer to hold the smooth rod were pretty mickey mouse and couldn't be tightened neatly without shimming due to the rods sticking above the frame quite a ways. I left extra room above the rod and added…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesThreeDimensional
Luckybot (Food Extruder) adaptor to fit Tronxy P802, Anet A8 and Similar
Adaptor to fit the Wiiboox LuckyBot 3D Printer Food Extruder to Tronxy P802, Anet A8 and Similar 3D printers. Will require 2 off M3 x 20mm cap head screws to fit belt ends around.
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesMaximM2
3dTouch or BLTouch Sensor Mount for P802Q
An attempt to mount 3d Touch Sensor to the Zonestar P802Q (steel) carriage. V1 is light version with single bolt fastening. A part of the sensor's PCB is not protected. V2 with a more massive mount on two bolts and full PCB protection.…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesJohn S
X Tensioner For Geared Idler Tronxy P802
This is a redo of my original x-tensioner so I could replace the idler bearing with a geared bearing to reduce belt vibration. This uses the same 5mm hardware that came with my printer. This is made to use a GT2 20 teeth idler pulley with…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
Printablesboothyboothy
Zonestar P802QR2 X Axis Extruder Mount with Tensioner
This is a revision of my Right Hand X Axis extruder mounts for the Zonestar P802QR2 ( https://www.thingiverse.com/thing:3065295 ) that includes a Tensioner assembly for the X Axis drive belt. The Thing utilizes the existing bearing and…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesHerbz
Zonestar p802n/na/nq
Hi, this is the parts for the p802n Category: 3D Printer Parts
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesJohn S
Tronxy P802E Extruder Offset Mount
When the extruder is mounted on the left side, the lever interferes with the x motor at the top of the print range. This plate shifts it away just enough. Print instructions Category: 3D Printer Parts Print Settings Rafts: No Supports: No…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesPaul C
a8 p802ma spool mount
Dec 20 2018 Update filclip1 made a bit stronger..at the hook . ( its reversible if you put it on the inside of the spool so it doesn't interfere with the x carriage near the top.. Added custom z couple. ( no stretch to help with z wobble)…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesCrazytiti
Repetier auto-level 0.92.9 for DMY3DP-001 (p802m / anet a8 clone)
All files are on github : https://github.com/crazytiti/Repetier0.92.9-DMY3DP This is preconfigurated repetier firmware 0.92.9 with auto level for DMY3DP-001 3d printer (anet a8 clone with modified melzi electronics) It use the bed sensor…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablesboothyboothy
Zonestar P802QR2 Nozzle Allignment Jig
DO NOT USE WHEN NOZZLES\HEATER BLOCKS ARE HOT! Description: Zonestar P802QR2 Nozzle Allignment Jig. The jig is an aid to aligning the two hot ends relative to each other. There may be some additional levelling required when levelling…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablesboothyboothy
Zonestar P802QR2 Y Axis Belt Tensioner
Zonestar P802QR2 Y Axis Belt Tensioner 1.The unit is made up of 3 parts, a main body, tensioner and facia plate\washer. 2.You will require 4 x M3 x 20 mm long bolts with nuts (the nuts and bolts provided with the original kit work fine)…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesDan Murphy
Tronxy p802e e3d v6 adapter
I needed an easy way to mount the e3d v6 clone I purchased for my p802e so I made this. I used this cooling fan adapter https://www.thingiverse.com/thing:506958 , however the blue one that comes with the e3d v6 might also work but is…
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesMaximM2
X motor mount and Z rods fix (P802Q upgrade)
What this? My attempt to fix a few issues with Zonestar P802Q printer (Prusa i3 clone). Includes X motor, cooling fun mount and bit more to fix a problems with XY axis parts. Designed to increase rigidity and a few bug fixes for the…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printableskamosawasan
Zonestar P802Q series z-bottom fix bracket
Zonestar P802Q series is a 3d printer that is one of "clones" of Prusa i3 with stainless frame. The stainless bracket of z-axes of those printers' fixes only the stepper motors but the z linear shafts are in holes drilled on the brackets.…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesDJ_Foot
TronXY P802M Dual MOSFET Mount Plate
Mount Plate for 2 MOSFET RAMPS for TronXY P802 series REPRAP 3D printer. For use with MOSFET Mounting holes 62.8mm x 37.8mm apart for 3mm screw Link to MOSFET board on ebay:…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesLowich
P802MA LCD backplate
RepRap LCD backplate for Tronxy P802MA. It can be mounted just on the right side, it should be fine, becouse that's where the button is. Also check if your cables are long enough. Category: 3D Printer Parts
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
Printablesboothyboothy
Z Axis Anti-Rotation Packer for the Zonestar P802QR2
Z Axis Anti-Rotation Packer\Wedge for the Zonestar P802QR2 Wow, that's a mouthful. Basically due to the design of the stepper motor mounting tab when tension is applied to the X axis drive belt the Z axis stepper motor rotates off the…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesAkentut
P802Q 12864 Mount
Thanks to KayIOA for this. His works on the Tronxy. I modded it to fit the stainless steel Zonestar to mount where the 2004 5 button LCD was mounted. The other parts such as the cover and a button can be found on his link, the Remix…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesDan Murphy
Bowden extruder mount for AM8 from Tronxy p802e
I modified the corner bracket of pheneeny's AM8 to be able to mount the extruder like it was mounted on my Tronxy p802e. After a year of loading filament into it, i didn't want to change my technique, lol. Enjoy! Category: 3D Printer…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printables3DJupp
Zonestar P802M Heatbed Cable Holder
Remix of the Heatbed Cable Holder for the Anet A8. Print Settings Printer: P802M Rafts: No Supports: Yes Resolution: 0,15 Infill: 30% Category: 3D Printer Parts
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
DMY3DP (P802M clone) X-belt Toothed Idler Tensioner
Remix from remix from remix.... To match my DMYCO DMY3DP-001 (P802M clone) So : wider hole for belt and bearing hole for rods because i keep the original left motor holder use M3 nuts for tighteners Be aware of the thinner guide, try not…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
Printablesboothyboothy
Simple Cable Hoops for the Zonestar P802QR2
Simple thing to provide cables hoops above the motherboard to help tidy the various cables running vertically up the frame. Category: 3D Printer Parts
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesJohn S
E3D V6 Mount For Tronxy P802
I upgraded to an E3D V6 and made this mount and part cooling duct for it. I've been using this design for several months now. The only thing that is relatively new is my using of printed bushings and the bushing holders I made. The part…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesDan Murphy
Tronxy p802 blower fan nozzle
I remade the stock blower fan nozzle for the p802 because mine was in rough shape and i wanted a color change. I used supports for the duct but you might not have to. Should be printed on its side so you wont need any external supports.…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printables3DJupp
Light Bracket for Zonestar P802M
Remix of the Light Bracket for the Prusa i3. Should fit on Zonestar P802 -M and other types like the Anet A8 I will develop an own case which holds two or more of this light modules. This might take some Time until i got the modules from…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesMamllow Fpv
blocage courroie X tronxy/zonestar p802m
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesMamllow Fpv
anti-torsion des barres Z tronxy/zonestar p802m
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: No Resolution: 0.2 Infill: 20% Gyroid Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s en vitesse d'impression et 20mm/s pour les parois
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printables
anti-torsion des barres Z tronxy/zonestar p802m
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: No Resolution: 0.2 Infill: 20% Gyroid Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s en vitesse d'impression et 20mm/s pour les parois
P
Printables
blocage courroie X tronxy/zonestar p802m
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
P
Printables
Blower fan mount for Tronxy p802e
Extended the mount to allow room for my cooling fan. Update: split the model to make it easier to print, then it can be glued together for use. Category: 3D Printer Parts
P
Printables
Tronxy p802e extruder plate
Replacement part I made for Tronxy p802e extruder plate copying the dimensions from the original. Hasn't been tested yet, but if you make one post a pic and let me know how it works! Category: 3D Printer Parts